Prototyping of electronic devices, installation of prototypes / serial products / Metrology / Services

Rating:
(0 / 5)

Quick order

3D printing ABS / PLA (layer ≤ 0.25 mm), cub. cm.
3D printing ABS / PLA (layer 0,2 mm), cub. cm
3D printing ABS / PLA (layer 0.15 mm), cube. cm
3D printing ABS / PLA (layer ≥0.1 mm), cub. cm
3D printing of MJM (25 mrm layer), cube. cm
DMLS-technology of 3d printing from powdered metals, cub. cm
Milling of light metals with a thickness of 1-2 mm, l.m.
Milling of light metals 3-4 mm thick, item m.
Textolite milling thickness of 1-2 mm, l.m.
Milling of PCB 3-4 mm thick, pm
Milling of polymers 1-4 mm thick, item m.
Milling of polymers 5-10 mm thick, item m.
Production of 3D casting / layering, man-hours
Milling of light metals with thickness> 4 mm, rm.
PCB milling with a thickness of> 4 mm, rm.
Milling of polymers, except PVC,> 4 mm thick, item m.
PVC milling, thickness> 4 mm, rm.
Manual soldering of a pin output with a diameter up to 1 mm of an element on a printed circuit board,
Manual soldering pin pin with a diameter of 1 to 5 mm of element on a printed circuit board
Manual soldering of SMD component output to single and double sided PCB
Manual soldering of the BGA component output to single and double sided PCB
Automatic soldering of SMD component output to single and double sided PCB
Automatic soldering of a pin output with a diameter up to 1 mm of an element on a printed circuit board
Washing of printed circuit boards from flux residues, sq. Dm.
Additional services for the installation of printed circuit boards of complex shape and flexible-rigid printed circuit boards, square.
Moisture protection PCB varnish, sq. Dm.
Moisture protection of the PCB compound, sq. Dm.
Setup and testing of developed power supply systems, man-hour
Setup and testing of the developed systems for generating low-frequency signals, man-hour
Tuning and testing of developed systems for generating high-frequency signals up to 10 MHz, man-hour
Installation of a conductor with a diameter of 1 mm on a printed circuit board
Installation of a conductor with a diameter up to 1 mm on the pin / lamella / connector
Installation conductor with a diameter of 1 to 8 mm.
Installation of ribbon cable with the number of contacts up to 10
Installation of ribbon cable with the number of contacts from 10 to 30
Installing the DIP connector on the PCB
Install SMD connector on the PCB
Testing algorithms of the developed microprocessor systems for compliance with the technical task of the customer, man-hour
Prototype / serial assembly, man-hour