Research&development services
+381 62 854 4808

Blending in the melt, blowing the film, sample preparation

  • Rating:
  • (0 / 5)
Quick order

Description

Production of samples for physico-mechanical tests (GOST 12019)

Injection molding machine for sample preparation

Molding a calibrated sheet from a polymer melt

Labtech Extrusion Rolling Line for Casting Sheets and / or Rolled Film

Quality assessment of the distribution of the filler in the polymer matrix

LabTech Filter Test with Gear Pump

Creation of polymer compounds by melt mixing

LabTech Laboratory twin screwextruder with a screw diameter of 26 mm

Dry mixing of samples creating premix, dusting

LabTech Laboratory pilot high-speed mixer for a capacity of 25l

Blowing a three-layer polymer film with a total thickness of up to 250 microns

LabTech line for blowing a three-layer polymer film

    Comments and reviews (0)
    No comments yet
    Add comment
    Please rate it
    See also:
    Ultrasound control

    Ultrasound control
    Radiographic control

    Radiographic control
    Capillary control

    Capillary control
    Eddy current control

    Eddy current control
    Production capabilities

    Production capabilities
    Chart definition

    Chart definition
    Measurement of thickness and optical properties of thin films

    Measurement of thickness and optical properties of…
    Topology research

    Topology research
    Spectrophotometric studies

    Spectrophotometric studies
    High-intensity ultrasonic treatment of liquid media

    High-intensity ultrasonic treatment of liquid media
    Wear resistance and friction coefficient measurement

    Wear resistance and friction coefficient measurement
    Conductivity measurement

    Conductivity measurement
    Equipment rent

    Equipment rent
    Consulting services of specialists of the CCP in the direction of

    Consulting services of specialists of the CCP in the…
    Development of monitoring programs for “clean production facilities”

    Development of monitoring programs for “clean production…
    Control of solid aerosol particles

    Control of solid aerosol particles
    Microbiological control

    Microbiological control
    Determination of the level of bacterial endotoxins in water and samples under study (up to 5 points)

    Determination of the level of bacterial endotoxins…
    Services for the application of optical microscopy and scanning electron microscopy (including sample preparation) per hour

    Services for the application of optical microscopy…
    Contactless measurement services using laser micrometers

    Contactless measurement services using laser micrometers
    Equipment services

    Equipment services
    Material processing services using laser technology

    Material processing services using laser technology
    HPLC analysis services

    HPLC analysis services
    Physical and mechanical tests

    Physical and mechanical tests
    Evaluation of Molecular Characteristics

    Evaluation of Molecular Characteristics
    Thermal analysis of materials

    Thermal analysis of materials
    General chemical methods of analysis

    General chemical methods of analysis
    Integrated development of laser systems

    Integrated development of laser systems
    Production of pre-production samples of laser systems / optical devices

    Production of pre-production samples of laser systems…
    PCB layout and programming

    PCB layout and programming
    CD production

    CD production
    Installing and configuring MEMs mirrors

    Installing and configuring MEMs mirrors
    Laser micro-surface treatment

    Laser micro-surface treatment
    Fiber Laser Testing

    Fiber Laser Testing
    Development work

    Development work
    Development of design and technological documentation

    Development of design and technological documentation
    Conducting research and development with experimental research

    Conducting research and development with experimental…
    Prototyping by rapid prototyping (plastic)

    Prototyping by rapid prototyping (plastic)
    Making wax models

    Making wax models
    Making master models on a 3D printer

    Making master models on a 3D printer
    Production of high-precision castings

    Production of high-precision castings
    Production of parts by selective laser fusion (not including the cost of the material)

    Production of parts by selective laser fusion (not…
    Repair of parts by the method of laser welding and welding

    Repair of parts by the method of laser welding and…
    Manufacturing of parts on 3-coordinate CNC equipment

    Manufacturing of parts on 3-coordinate CNC equipment
    Manufacturing of parts on 5-axis milling equipment

    Manufacturing of parts on 5-axis milling equipment
    Production of parts on the turning and milling equipment Traub TNA300

    Production of parts on the turning and milling equipment…
    Wire EDM services

    Wire EDM services
    Services in electroerosive processing on the piercing machine

    Services in electroerosive processing on the piercing…
    Non-destructive testing services at CMM Global Performance

    Non-destructive testing services at CMM Global Performance
    3D scanning services

    3D scanning services
    R&D outsouring

    We specialize in research outsourcing and development outsourcing, using the best equipment and experts

    我们专注于研究外包和开发外包，使用最好的设备和专家

    نحن متخصصون في الاستعانة بمصادر خارجية للبحوث وتطوير الاستعانة بمصادر خارجية ، باستخدام أفضل المعدات والخبراء

    Nos especializamos en la investigación de outsourcing y desarrollo de outsourcing, utilizando los mejores equipos y expertos.

    Services
    Products
    Contacts

    JURIJA GAGARINA 231, NOVI BEOGRAD, SERBIA, 11070

    +381 62 854 4808

    info@rndoutsourcing.com

    Follow us
    JURIJA GAGARINA 231, NOVI BEOGRAD, SERBIA, 11070 +381 62 854 4808